Jeep Gladiator JT Driveshaft Rear DS-JT1350-R

Description

Description

New Rear 1350 Series Jeep JT Gladiator (non CV) Slip Shaft with Solid cross/Gold series U-Joints, Pinion Flange, Transfer Case Flange and hardware \n \nApplication: \n \n2020 and up Jeep JT Gladiator \n \nWe build all rear JT Gladiator driveshafts to the same measurement. We guarantee the measurement up to a 4 inch lift. If you have a lift over 4 inches we would require a measurement. Each lift kit is different, so just to be sure we build the perfect driveshaft for you, we offer $10 off your purchase with a custom measurement. Please use code 10off along with your measurement with the Jeep sitting on the tires ride height. \n \nProduct Description: \n \nWe build each 1350 series slip shaft with 3” x .083 wall tubing (which is double the strength of the OEM tubing), 1 1/2” slip and spline, solid cross/non-greaseable U-Joints, pinion flange, transfer case flange and hardware. \n

**Our rear slip shaft does NOT have a CV. It has an 8 bolt flange on each end, for both pinion and transfer case, which bolts directly to the OEM Flanges.**

\nWe use all components from Spicer, NEAPCO, and Powertrain Industries. \n \n \n \nCA Residents: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov