Skip to content
Skip to product information
Description
    Do not use with pre 1999 ECU

    750+ rwhp capable returnless fuel system. The feed line is split by our compact y-block, then fed to the back of both rails. High performance Walbro (TI Automotive) fuel pumps can be calibrated to work seamlessly the original PWM fuel pump control system. Upgraded electrical system and upgraded Fuel Pump Driver Module (FPDM) is not included and may be required.
    • Fuel rails routed in PARALLEL
    • Requires modified or second FPDM

    INCLUDES:
    • SN95 Fuel Pump Module (dual pump)
    • 88mm Inline Fuel Filter
    • Compact Billet 2-1 o-ring Y-block
    • SN95 2V Billet Fuel Rails
    • All fittings, hose, and hardware necessary to complete typical fuel line plumbing:
    -20 feet of fuel line and 8 matching hose ends
    -Qty 5, AN to o-ring straight fittings
    -Qty 3, AN to o-ring 90 degree low profile fittings
    -Qty 6, hose straps with stainless mounting screws
    -Qty 2, 1/8 NPT plugs

    FAQS:

    Can 405 lph or 465 lph pumps be operated in a returnless configuration?
    No, the pumps' minimum output is too much supply for idle/cruising. (two pumps) We do not recommend running anything larger than the F90000265 (305lph) fuel pumps in this configuration.

    Do you sell upgraded FPDMs?
    No, a second Fuel Pump Driver Module (FPDM) and pigtail harness can be purchased from Ford. Some of our customers use our FC2 controller as a power supply for twin FPDMs.

    How much power can be made in a PWM (returnless) configuration?
    We have supported over 1000 rwhp in a PWM configuration, but we generally set the limit around 700-750 rwhp (gasoline applications, lower for E85) for driveability. Due to the fact that "electronic returnless" is a reactive fuel system (it is always a step behind the motor demand) it generally cannot adequately keep up with the severe demand transients that modified motor requires.


    FITS:

    • 1999-2004 Mustang GT and V6
    • Will not fit COP (coil over plug) engines with aftermarket coil packs.
    • Wiring upgrade not required for under 525 rwhp
    • Requires 2003-2004 Cobra fuel tank gasket (reusable)

     

    TI Automotive (and Walbro) fuel pumps are sold only with TI Automotive’s warranty. Currently, TI Automotive does not have a warranty on their high performance parts.

    Fore Innovations - L2 - Dual Pump Returnless Fuel System for 2V SN95 - SN95 - 99 - 04 Ford Mustang GT / V6

    Regular price $1,102.00

    Shipping calculated at checkout

    Specifications

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    Description
      Do not use with pre 1999 ECU

      750+ rwhp capable returnless fuel system. The feed line is split by our compact y-block, then fed to the back of both rails. High performance Walbro (TI Automotive) fuel pumps can be calibrated to work seamlessly the original PWM fuel pump control system. Upgraded electrical system and upgraded Fuel Pump Driver Module (FPDM) is not included and may be required.
      • Fuel rails routed in PARALLEL
      • Requires modified or second FPDM

      INCLUDES:
      • SN95 Fuel Pump Module (dual pump)
      • 88mm Inline Fuel Filter
      • Compact Billet 2-1 o-ring Y-block
      • SN95 2V Billet Fuel Rails
      • All fittings, hose, and hardware necessary to complete typical fuel line plumbing:
      -20 feet of fuel line and 8 matching hose ends
      -Qty 5, AN to o-ring straight fittings
      -Qty 3, AN to o-ring 90 degree low profile fittings
      -Qty 6, hose straps with stainless mounting screws
      -Qty 2, 1/8 NPT plugs

      FAQS:

      Can 405 lph or 465 lph pumps be operated in a returnless configuration?
      No, the pumps' minimum output is too much supply for idle/cruising. (two pumps) We do not recommend running anything larger than the F90000265 (305lph) fuel pumps in this configuration.

      Do you sell upgraded FPDMs?
      No, a second Fuel Pump Driver Module (FPDM) and pigtail harness can be purchased from Ford. Some of our customers use our FC2 controller as a power supply for twin FPDMs.

      How much power can be made in a PWM (returnless) configuration?
      We have supported over 1000 rwhp in a PWM configuration, but we generally set the limit around 700-750 rwhp (gasoline applications, lower for E85) for driveability. Due to the fact that "electronic returnless" is a reactive fuel system (it is always a step behind the motor demand) it generally cannot adequately keep up with the severe demand transients that modified motor requires.


      FITS:

      • 1999-2004 Mustang GT and V6
      • Will not fit COP (coil over plug) engines with aftermarket coil packs.
      • Wiring upgrade not required for under 525 rwhp
      • Requires 2003-2004 Cobra fuel tank gasket (reusable)

       

      TI Automotive (and Walbro) fuel pumps are sold only with TI Automotive’s warranty. Currently, TI Automotive does not have a warranty on their high performance parts.

      Fore Innovations - L2 - Dual Pump Returnless Fuel System for 2V SN95 - SN95 - 99 - 04 Ford Mustang GT / V6

      Get In Touch

      Drawer Title

      This website uses cookies to ensure you get the best experience on our website.

      Similar Products